materials calculator
Concrete Block Calculator
The Concrete Block Calculator applies blocks = wall area ÷ block face area to entered measurements and returns block and mortar quantity. A numerical default is embedded in the served HTML before JavaScript runs. Use it for planning, then verify field measurements, current codes, product instructions, and structural assumptions before ordering or cutting.
Calculated result
378 blocks
Wall area divided by the block face area gives the course count, and the waste allowance covers cuts and breakage. Mortar is a typical planning yield of about 33 blocks per bag; follow the bag label for the mix actually used.
- Wall area
- 320.0 ft²
- Block face area
- 0.889 ft²
- Courses
- 12
- Mortar bags
- 12
Printable result and cut list
| Item | Value | Job note |
|---|---|---|
| Primary result | 378 blocks | Verify before cutting or ordering. |
| Wall area | 320.0 ft² | Calculated from the entered dimensions. |
| Block face area | 0.889 ft² | Calculated from the entered dimensions. |
| Courses | 12 | Calculated from the entered dimensions. |
| Mortar bags | 12 | Calculated from the entered dimensions. |
| Formula | Expression | Note |
|---|---|---|
| Primary formula | blocks = wall area ÷ block face area | Round the final result, not each intermediate value. |
How the concrete block calculation works
Enter the job dimensions in the form. The calculator normalizes the values, applies blocks = wall area ÷ block face area, and updates the main result, supporting values, diagram labels, and print table together.
The first displayed example is calculated during the static build. That makes the formula and a complete numerical result readable in page source, while the browser script handles later input changes.
Worked example
The prefilled values form a complete block and mortar quantity example. Change one field at a time and compare the updated result with the formula table to catch unit or transcription mistakes.
Common errors to avoid
- Mixing nominal and actual material dimensions.
- Entering diameter where the formula expects radius, or total run where it expects one tread.
- Rounding every intermediate value instead of rounding the final purchase or cut quantity.
- Treating a planning result as a stamped structural design or local-code approval.
Concrete block and cinder block sizes
"Concrete block" and "cinder block" are used interchangeably in the trade; both are hollow concrete masonry units (CMU). The nominal size includes the mortar joint, so a nominal 8 × 8 × 16 in block actually measures 7⅝ × 7⅝ × 15⅝ in and covers a nominal face of 0.89 ft².
| Nominal size | Actual size | Face area | Blocks per 100 ft² |
|---|---|---|---|
| 8 × 8 × 16 in | 7⅝ × 7⅝ × 15⅝ in | 0.89 ft² | 113 |
| 6 × 8 × 16 in | 5⅝ × 7⅝ × 15⅝ in | 0.89 ft² | 113 |
| 4 × 8 × 16 in | 3⅝ × 7⅝ × 15⅝ in | 0.89 ft² | 113 |
| 390 × 190 × 190 mm | 390 × 190 × 190 mm | 0.08 m² | 12.5 per m² |
Enter the nominal length and height, because those dimensions already include the 10 mm (⅜ in) mortar joint that the finished wall repeats.
Mortar and reinforcement
- Mortar planning yield is roughly one 80 lb bag of mortar mix per 33 blocks; sand and mix ratio change that figure.
- Grouted cores, bond beams, and vertical rebar add concrete that is not part of the block count.
- Half blocks, corner blocks, and lintel units are ordered as separate line items.
- The waste allowance covers cutting and breakage, not design changes.
Frequently asked questions
Does the concrete block calculator work without JavaScript?
The default worked result, formula, diagram, and result table are included in the served HTML. JavaScript is only needed to recalculate after you change an input.
Which unit should I use?
Use the imperial page for US customary inputs or open the metric twin for millimetres, centimetres, and metres.
Can I use the result for purchasing material?
Use it as a quantity and layout check, then add the stated waste allowance and confirm package coverage, stock dimensions, and field conditions.
Does this replace building code or an engineer?
No. The calculator is a planning aid. Current local code, product documentation, and a qualified engineer govern structural and life-safety decisions.
How many concrete blocks do I need per square foot?
About 1.125 blocks per square foot of wall for a standard 8 × 8 × 16 in unit, which is 113 blocks per 100 ft² before waste. In metric terms it is 12.5 blocks per square metre.
Is a cinder block the same as a concrete block?
In everyday use, yes. Historically cinder blocks used coal cinder aggregate and were lighter and weaker; blocks sold today are concrete masonry units, and this calculator applies to both.
How many bags of mortar do I need for 100 blocks?
About three 80 lb bags of pre-blended mortar mix, using a planning yield of roughly 33 blocks per bag. Joint thickness, workmanship, and mix ratio change the real figure, so confirm the bag coverage.
Related pages
More calculators
iPhone companion
Keep jobsite math available offline
The website calculators and charts stay free. The BuildMath iPhone app keeps its supported construction calculations available when the jobsite has no connection.
View BuildMath on the App StoreLast reviewed .