materials calculator
Cubic Yard Calculator
The Cubic Yard Calculator applies cubic yards = length × width × depth ÷ 27 to entered measurements and returns material volume in cubic yards. A numerical default is embedded in the served HTML before JavaScript runs. Use it for planning, then verify field measurements, current codes, product instructions, and structural assumptions before ordering or cutting.
Calculated result
2.47 yd³
Length times width times depth gives the raw volume, which is divided by 27 to reach cubic yards. Identical sections are multiplied by the section count before the total is rounded.
- Cubic volume
- 66.67 ft³
- Volume per section
- 2.47 yd³
- Coverage area
- 200 ft²
Printable result and cut list
| Item | Value | Job note |
|---|---|---|
| Primary result | 2.47 yd³ | Verify before cutting or ordering. |
| Cubic volume | 66.67 ft³ | Calculated from the entered dimensions. |
| Volume per section | 2.47 yd³ | Calculated from the entered dimensions. |
| Coverage area | 200 ft² | Calculated from the entered dimensions. |
| Formula | Expression | Note |
|---|---|---|
| Primary formula | cubic yards = length × width × depth ÷ 27 | Round the final result, not each intermediate value. |
How the cubic yard calculation works
Enter the job dimensions in the form. The calculator normalizes the values, applies cubic yards = length × width × depth ÷ 27, and updates the main result, supporting values, diagram labels, and print table together.
The first displayed example is calculated during the static build. That makes the formula and a complete numerical result readable in page source, while the browser script handles later input changes.
Worked example
The prefilled values form a complete material volume in cubic yards example. Change one field at a time and compare the updated result with the formula table to catch unit or transcription mistakes.
Common errors to avoid
- Mixing nominal and actual material dimensions.
- Entering diameter where the formula expects radius, or total run where it expects one tread.
- Rounding every intermediate value instead of rounding the final purchase or cut quantity.
- Treating a planning result as a stamped structural design or local-code approval.
Cubic yard conversions
A cubic yard is a cube 3 ft on each side, so it holds 27 cubic feet. Because depth is normally measured in inches, the practical shortcut is: square feet × inches of depth ÷ 324 = cubic yards.
| Unit | Equal to | Note |
|---|---|---|
| 1 cubic yard | 27 ft³ | 3 ft × 3 ft × 3 ft |
| 1 cubic yard | 0.7646 m³ | Metric equivalent |
| 1 cubic metre | 1.308 yd³ | Reverse conversion |
| 1 cubic yard | 202 US gallons | Liquid equivalent |
| 1 cubic yard of concrete | 45 bags at 80 lb | Typical yield, check the bag |
Measuring irregular areas
Split an L-shaped or stepped area into rectangles, run each one through the calculator, and add the results. The identical sections field multiplies the same rectangle when several beds, pads, or trenches share one size.
Frequently asked questions
Does the cubic yard calculator work without JavaScript?
The default worked result, formula, diagram, and result table are included in the served HTML. JavaScript is only needed to recalculate after you change an input.
Which unit should I use?
Use the imperial page for US customary inputs or open the metric twin for millimetres, centimetres, and metres.
Can I use the result for purchasing material?
Use it as a quantity and layout check, then add the stated waste allowance and confirm package coverage, stock dimensions, and field conditions.
Does this replace building code or an engineer?
No. The calculator is a planning aid. Current local code, product documentation, and a qualified engineer govern structural and life-safety decisions.
How many cubic feet are in a cubic yard?
Twenty-seven. A cubic yard is 3 ft × 3 ft × 3 ft, so 3 × 3 × 3 = 27 cubic feet, or about 0.765 cubic metres.
How do I convert square feet to cubic yards?
Multiply the area in square feet by the depth in inches and divide by 324. For example, 500 ft² at 4 in deep is 500 × 4 ÷ 324 = 6.17 cubic yards.
How many 80 lb bags of concrete make a cubic yard?
About 45 bags at 0.60 ft³ each, or 60 bags of 60 lb. Yields differ by product, so check the bag label before ordering the full pallet.
Related pages
More calculators
iPhone companion
Keep jobsite math available offline
The website calculators and charts stay free. The BuildMath iPhone app keeps its supported construction calculations available when the jobsite has no connection.
View BuildMath on the App StoreLast reviewed .