Construction converter
Regular Polygon Miter Angle Converter
The Regular Polygon Miter Angle Converter divides 180 degrees by the number of sides. An eight-sided frame uses a 22.5-degree miter at each end, and that default result is rendered in HTML. The formula assumes a regular closed polygon with equal sides and equal interior angles; irregular layouts require each joint to be measured separately.
Converted result
22.5 ° miter
Use this for equal-sided frames, columns, aprons, and segmented layouts.
| Direction | Formula | Use |
|---|---|---|
| Forward | miter angle = 180° ÷ number of sides | Convert the entered source value. |
| Reverse | number of sides = 180° ÷ miter angle | Audit the converted result. |
How to use this construction conversion
Use this for equal-sided frames, columns, aprons, and segmented layouts. First copy the source value exactly as it appears on the drawing, product label, field note, or supplier document. Record the source unit beside the number. A value without a unit is not a usable construction measurement, even when the arithmetic itself is correct.
Enter the source values in the tool above. The initial example is calculated during the static build and placed directly in the HTML, which makes the number available without JavaScript. Browser code recalculates locally when an input changes; no project measurement needs to leave the device for this conversion.
Forward and reverse check
The forward relationship is miter angle = 180° ÷ number of sides. The reverse relationship is number of sides = 180° ÷ miter angle. Use the reverse formula on the displayed answer whenever a converted dimension will control a cut, layout line, order quantity, or code comparison. A round-trip difference normally reveals premature rounding or a mismatched source unit.
Material thickness, bevel, spring angle, and an out-of-regular layout can require a different compound cut. Write both the source and converted values on the job sheet. If another person receives only the rounded converted number, they cannot reconstruct the original precision or confirm which conversion was used.
Rounding and field precision
Conversion does not create accuracy that was absent from the measurement. Keep all available digits through the formula, then round the final answer once. Counts and package quantities usually round up. Dimensions should round to the precision supported by the measuring tool, material tolerance, connection detail, and actual work method.
For structural members, stairs, guards, ramps, and roof systems, a unit conversion is only one part of verification. Check the current primary source, local amendments, product instructions, loads, connections, and field conditions. A clean converted number is not an approval of the design.
Related calculator and printable chart
Open the related calculator to place the converted value into a complete formula. The printable chart PDF provides an independent reference that can be stored with the job notes. The HTML chart also exposes every table row without relying on JavaScript.
iPhone companion
Keep jobsite math available offline
The website calculators and charts stay free. The BuildMath iPhone app keeps its supported construction calculations available when the jobsite has no connection.
BuildMath — coming soon to the App Store
Last reviewed .